Let's Finish It.

Annodizing, plating, painting, heat treatments are all carried out by our approved suplliers.

Our Finishing Services.

Plating - is a thin layer of metal that has been added to the outside of a material. It is a surface covering process by which a metal is deposited on a conductive surface.
Plating is carried out by our approved suppliers.
Conductive Painting -The most commonly used conductive paints are loaded with either nickel, copper or silver particles..
Conductive Painting is carried out by our approved suppliers.
Wet Painting -Wet painting is a general term used to cover a multitude of paint finishes, it is a method of protecting and improving the visual appearance of components, structures and fabrications.
Wet Painting is carried out by our approved suppliers.
Powder Coating -cover (an object) with a polyester or epoxy powder, which is then heated to fuse into a protective layer.
Powder Coating is carried out by our approved supplier.
Anodizing - coat (a metal, especially aluminium) with a protective oxide layer by an electrolytic process in which the metal forms the anode.
Heat Treatment - a controlled process used to alter the microstructure of metals and alloys such as steel and aluminium to impart properties which benefit the working life of a component, for example increased surface hardness, temperature resistance, ductility and strength.
EMI Gasketing -EMI shielding gaskets are mechanical devices that help protect electronics from electromagnetic interference. Traditionally, EMI shielding has been fabricated from metal sheets and formed into shapes that fit electronic housings or enclosures.
Shot Peening -Shot peening is a cold working process used to produce a compressive residual stress layer and modify mechanical properties of metals and composites.
Shot Peening is done in house.
Wet Blasting - is the use of an abrasive media and compressed air to achieve a desired finish on a chosen surface. However, unlike dry blasting, wet blasting (or Vapormatting) uses a third element – liquid – to enhance the levels of surface finish that can be achieved.
Wet Blasting is done in house.
Alochrom 1200
R&G Have in place an approved substitute for the Alochrom 1200 process.